UCRETE® HP/HPQ
Ucrete HP and HP/Q are three-component polyurethane-concrete systems with a broadcast aggregate. Both of these systems are installed at a finished thickness of 1/4 – 3/8" (6 – 9 mm). The thickness is determined by the service and cleaning temperatures and the severity of traffic expected. Ucrete HP/Q uses a colored quartz aggregate to yield a textured surface. Ucrete HP uses a translucent quartz aggregate. Ucrete floors are extremely tough and have many physical properties that exceed those of typical concrete.
Features
- Slip-resistant finish
- Thermal stability
- Two-step application
- Solvent free Low odor
- No priming or sealing of substrate
- 30 years of project references
- Unaffected by freeze-thaw cycles
- Excellent impact and abrasion resistance
- Extremely high bond strength
- Chemical resistant
- Can be applied to 7 – 10 day old concrete
- Wide temperature service range from
- Slip-resistant finish
- Coefficient of thermal expansion similar
Benefits
- Improved safety, especially in wet areas
- Takes continuous hot-water cleaning
- 48-hour installation time
- VOC compliant
- Speeds application time
- Proven track record
- Handles wide temperature fluctuations
- Handles heavy traffic
- Reduces shear at bond line
- Tolerates organic and inorganic acids, alkalis and salts
- Accelerates work schedules
- Exceeds that of typical epoxy overlays -50 to 210° F (-45 to 100° C)
- Meets ADA recommendations
- Prevents shear at bond line